The 312B-4 and 312B-5 Station Controls. Contains a directional coupler and wattmeter, a speaker, a phone patch, and appropriate switching circuitry. The same types of directional coupler and wattmeter, phone patch, and speaker are used in both the 312B-4 and 312B-5. In addition, the 312B-5 contains an auxiliary variable frequency oscillator to provide separate transmit and receive frequencies when used with the KWM-2 or KWM-2A Transceivers.
The wattmeter indicates power levels within the ranges of 0 to 200 or 0 to 2000 watts, forward or reflected. It is accurate over the range of 2 to 30 MHz, but should not be used on higher frequencies. The phone patch includes circuitry which allows VOX phone patch operation. It can also be switched manually if desired. The vfo in the 312B-5 is the same as that used in KWM-2/2A and S/Line equipment. Switching circuits are provided to allow operation of KWM-2/2A Transceivers on different transmit and receive frequencies or transmit-receive operation on the same frequency using either vfo.
Frequency range ..... 2 to 30 MHz.
Impedance ........... 52 ohms unbalanced
Wattmeter scales .... 200 watts, forward
2000 watts, forward
200 watts, reflected
2000 watts, reflected
Size ................ 10-3/4" w x 7-1/2" h x 11-3/4" d including feet
Weight .............. 8-1/2 Lb
Maximum power ....... 2000 watts forward power
Power loss .......... Less than 0.1 percent
Introduced SWR ...... Less than 1.05:1, 2 to 30 MHz
Input impedance ..... 600 ohms
Output impedance .... 600 ohms
Impedance ........... 3 to 4 ohms
Size ............ ... 5 by 7 inches
Frequency range ..... 2.5 to 2.7 MHz.
Calibration accuracy. Within 1 kHz after midband calibration.
Drift ............... Less than 100 Hz after 30-minute warmup.
Dial backlash ....... Less than 50 Hz.
Power ..........Supplied by KWM-2 or KWM-2A transceiver PS.
Copyright © 1996-WA3KEY & 1964-Collins Radio Company
This Home Page was created by wa3key, Saturday, March 16, 1996
Most recent revision Saturday, March 16, 1996